In pharmaceutical production, powders must move from drums, bags or containers to tablet presses, capsule fillers and mixers without contamination, without dust and without operators lifting heavy loads. Vacuum pneumatic conveying is the standard answer.
How a vacuum conveyor works
- A vacuum pump depressurises the conveyor body.
- The product is drawn through a hose into the receiver, while a filter retains the fine particles.
- When the receiver is filled to the desired height, a level sensor stops the suction.
- The discharge valve opens and the product drops into the machine below, while pressurised air cleans the filter.
What the pharmaceutical industry expects
- Hygiene: stainless steel 316L product contact parts, polished surfaces, FDA-compliant materials.
- Cleanability: clamp connections so that the conveyor can be dismantled and washed quickly, with washable filters.
- Safety: ATEX certification for gas and dust zones.
- Gentle handling: fragile products such as tablets and capsules must not break.
TECHNIlab's TPP range
TECHNIlab, a French manufacturer founded in 1987, designed its TPP (Transfer for Pharmaceutical Powders) conveyors for pharmaceutical machinery builders. The TPP has a 316L stainless steel body meeting FDA hygiene requirements, is ATEX certified for gas and dust, and uses a full clamp design. A typical configuration includes a 5-litre receiver with an inner ePTFE filter (0.2 µm, HEPA H13, washable), a capacitive level sensor, a Triclamp ID150 discharge valve and a multi-stage vacuum pump. It is suited to tablets, capsules, pharmaceutical powders and granules.

References
TECHNIlab equipment is used by pharmaceutical, chemical and food companies worldwide, including Sanofi, Pfizer, Novartis, GSK, Hikma, Taro and AstraZeneca, according to the manufacturer's reference sheet. Soditech represents TECHNIlab in the MENA region.
Sources: TECHNIlab TPP brochure and reference sheet.
Résumé en français : l'article complet est disponible en anglais (bouton EN).
En production pharmaceutique, les poudres doivent passer des fûts ou sacs aux presses à comprimés et géluleuses sans contamination ni poussière. Le transfert pneumatique sous vide est la réponse de référence.
Exigences
Inox 316L et matériaux conformes FDA, démontage rapide par clamps, filtres lavables, certification ATEX gaz et poussières, manipulation douce des produits fragiles.
La gamme TPP de TECHNIlab
Corps 5 litres en inox 316L, filtre ePTFE 0,2 µm HEPA H13 lavable, capteur capacitif, vanne Triclamp ID150 et pompe à vide multi-étagée. Utilisée notamment par Sanofi, Pfizer, Novartis, Hikma ou AstraZeneca selon le fabricant. Soditech représente TECHNIlab dans la région MENA.