Conventional treatment trains were never designed to remove trace organic compounds present at nanogram-per-litre levels. As awareness of micropollutants grows, activated carbon adsorption has become one of the most widely used responses — and the handling of the carbon itself has become an engineering topic in its own right.
The Micropollutant Challenge
Micropollutants is an umbrella term for substances present in water at very low concentrations but with potential health or environmental effects: pharmaceutical residues, endocrine disruptors, pesticides and, increasingly in the spotlight, PFAS (per- and polyfluoroalkyl substances). Many of these compounds pass through biological treatment largely unaffected.
Adsorption on activated carbon is applied mainly as a tertiary or quaternary treatment step, in both drinking water plants and wastewater treatment plants. Its effectiveness depends on the compound, the carbon type, the contact time and — critically — on the ability to dose the carbon accurately and continuously.
Powdered vs Granular Activated Carbon
Activated carbon is used in two broad forms, each with its own handling logic:
- Powdered activated carbon (PAC) is a very fine powder dosed directly into the process — at the raw water intake, in a contact reactor, ahead of a clarifier or a filtration stage. It is used once and removed with the process sludge. PAC is flexible: the dose can be increased during pollution episodes and reduced when they pass.
- Granular activated carbon (GAC) is used in fixed beds or, in its micrograin form (µGAC), in fluidised-bed reactors. The carbon remains in the reactor for a long period and is periodically renewed. Fixed-bed GAC is regenerated or replaced once its capacity is used up.
The choice between the two depends on whether the need is occasional or permanent, on the target compounds, on the existing plant layout and on operating cost considerations.
How Sodimicrocarb Works
In Sodimate's range, activated carbon lines are built around the same core principles as its other powder handling systems: dependable storage, regular extraction without bridging and accurate dosing.
PAC lines
- Storage in a silo, big-bag discharge station, flobin or bag-dump hopper, depending on how the carbon is delivered.
- Extraction by a mechanical bin activator, providing continuous, even extraction without bridging.
- Dosing by volumetric or loss-in-weight feeders.
- Injection either through a slurry preparation tank and pump skid, or — increasingly — via a hydro-ejector, an eductor that conveys the powdered carbon in-line with motive water and removes the need for a separate preparation stage.
Micrograin GAC lines and Sodimicrocarb
Fluidised-bed reactors using micrograin GAC require carbon that is free of fines, which would otherwise be washed out or disturb the bed. Sodimicrocarb is Sodimate's micrograin activated carbon fines-removal system: carbon is extracted from a silo or big-bag station by a mechanical bin activator, metered by a volumetric or weight feeder, and passed through the Sodimicrocarb system so that the reactor is supplied with fines-free carbon for optimum loading.
Dust filtration, closed systems and ATEX-rated configurations are available, which is relevant given the combustible nature of carbon dust.
Sodimate reports installations including PAC dosing by hydro-ejector at the Sanofi Vertolaye wastewater plant for pharmaceutical residues, and micrograin GAC systems feeding fluidised-bed reactors at several French drinking water plants.
Regulatory Context in the GCC
Internationally, regulation of micropollutants is tightening. The revised EU Drinking Water Directive (2020/2184) introduced limits for PFAS, and in 2024 the US EPA set enforceable limits for several PFAS compounds in drinking water. These benchmarks are increasingly cited in technical specifications worldwide.
In the GCC, drinking water quality is governed by national regulations and GCC standardisation (GSO) references, generally aligned with WHO guidelines. With a large share of potable water coming from desalination and a growing emphasis on treated wastewater reuse, utilities and consultants are paying closer attention to trace organic contaminants. Treated sewage effluent used for irrigation or district cooling is one area where advanced polishing steps, including activated carbon, are being discussed. Project teams should always check the specific requirements applicable to each country and project.
Integration with Existing Plants
One of the practical strengths of PAC is that it can often be added to an existing plant with limited civil works: a storage and dosing skid, and an injection point upstream of an existing clarification or filtration step. Points to assess include:
- available contact time between the injection point and solids removal;
- the impact of additional solids on sludge production and handling;
- dust control and, where required, ATEX zoning around the carbon storage;
- the delivery format available locally (bulk, big bags or sacks), which drives the storage design.
Soditech works with Sodimate to help EPC contractors and utilities in the region define activated carbon storage and dosing systems adapted to each plant.
Sources: Sodimate, "Micropollutant treatment" (sodimate.com); EU Directive 2020/2184; US EPA PFAS National Primary Drinking Water Regulation (2024).
Résumé en français — l'article complet est disponible en anglais (bouton EN).
Résidus médicamenteux, perturbateurs endocriniens, pesticides, PFAS : les micropolluants traversent largement les traitements biologiques. L'adsorption sur charbon actif, en traitement tertiaire ou quaternaire, est l'une des réponses les plus répandues.
Poudre ou micrograins
Le charbon actif en poudre (CAP) est injecté directement dans le procédé et éliminé avec les boues ; il offre une grande souplesse de dosage. Le charbon actif en grains, notamment en micrograins (µCAG) pour réacteurs à lit fluidisé, reste en place plus longtemps.
Les solutions Sodimate
Pour le CAP : stockage en silo, big-bag, flobin ou trémie vide-sacs, extraction par désarcheur mécanique, dosage volumétrique ou pondéral, puis injection via un bac de préparation ou un hydro-éjecteur. Pour les micrograins, Sodimicrocarb est le système de défillérisation qui alimente le réacteur en charbon débarrassé de ses fines. Filtration des poussières, systèmes fermés et versions ATEX sont disponibles.
Contexte réglementaire et intégration
La directive européenne 2020/2184 et les limites PFAS de l'US EPA (2024) servent de plus en plus de référence. Dans le Golfe, l'importance du dessalement et de la réutilisation des eaux usées traitées renforce l'attention portée aux polluants traces. Soditech accompagne les EPC et exploitants dans l'intégration de ces systèmes.