Faure Equipements automatic filter press at a drinking water treatment plant
Case Study · Drinking Water Étude de cas · Eau potable

Dewatering Drinking Water Sludge: Three Filter Press References with Suez, John Cockerill and Saur

Déshydratation des boues d'eau potable : trois références de filtres-presses avec Suez, John Cockerill et Saur

Published · 3 min read

Publié le · 3 min de lecture

Clarification of drinking water produces a dilute sludge of hydroxides and suspended solids. The equipment manufactured by Faure Equipements is used on several drinking water plants to turn this sludge into a solid cake. Three references illustrate the approach.

Plant 1 (France)Plant 2 (Belgium)Plant 3 (France)
DesignerSuezJohn CockerillSaur
Commissioning202220212021
Sludge concentration12 g/L10 g/L15 g/L
ConditioningLime 30 %LimeLime
Equipment1 TITAN 220, full automatic2 TITAN 218, full automatic1 TITAN 219B, full automatic
Plates129 mixed pack, 1500 × 1500 mm55 mixed pack, 1000 × 1000 mm90 mixed pack, 1300 × 1300 mm
Cycles per day77 per filter8
Cycle time2 h 302 h 302 h 30
Production6,500 kg/batch800 kg/batch/filter3,500 kg/batch
Cake dryness37 %35 %36 %

A consistent design approach

All three plants use full-automatic presses with mixed-pack plates (a combination of membrane and recessed plates), which improves dryness and cake release. The sludge is conditioned with lime. The size of the press follows the quantity of solids: from two TITAN 218 working in parallel to a single large TITAN 220.

Twin TITAN 218 filter presses at a drinking water plant in Belgium
Twin TITAN 218 filter presses at a drinking water plant in Belgium

Results

Dryness between 35 and 37 % is reached on sludge that arrives at only 10 to 15 g/L. Seven to eight cycles per day allow the plants to treat their daily sludge production automatically.

TITAN 219B filter press for drinking water sludge
TITAN 219B filter press for drinking water sludge

Relevance for the region

Surface water and groundwater treatment plants in the MENA region generate similar sludge, as do pre-treatment stages of some desalination plants. Soditech can help assess the right press size and conditioning for each case.

Source: Faure Equipements reference sheets (case studies). Figures are those reported by the manufacturer for each installation and depend on the sludge treated.

More about Faure Equipements →   Discuss your project →

Résumé en français : l'article complet est disponible en anglais (bouton EN).

La clarification de l'eau potable produit une boue diluée d'hydroxydes. Trois usines (Suez en France en 2022, John Cockerill en Belgique en 2021, Saur en France en 2021) la déshydratent avec des filtres-presses automatiques Faure Equipements.

Configuration

Presses entièrement automatiques à plateaux mixed-pack, conditionnement à la chaux, taille adaptée à la quantité de matières : de deux TITAN 218 en parallèle à un TITAN 220 de 129 plateaux 1500 × 1500 mm.

Résultats

Siccité de 35 à 37 % sur des boues arrivant à 10 à 15 g/L, avec 7 à 8 cycles par jour de 2 h 30. Une approche transposable aux usines d'eau potable de la région MENA.

En savoir plus sur Faure Equipements →   Parler de votre projet →