Sodimate lime silo with mechanical discharger and feeder
Case Study · Desalination Étude de cas · Dessalement

Lime Handling for Desalination Plants Across the Gulf: Sodimate Regional References

Manutention de chaux pour les usines de dessalement du Golfe : les références régionales de Sodimate

Published · 3 min read

Publié le · 3 min de lecture

Every desalination plant must remineralise its product water before distribution, and lime is one of the main reagents used to do it. Over almost two decades, the equipment manufactured by Sodimate has been supplied to desalination and water projects in the United Arab Emirates, Saudi Arabia and Bahrain, through EPC contractors such as Metito, Suez, Degremont, OTV and Cadagua.

Manufacturer
Sodimate (France)
Region
UAE, Saudi Arabia, Bahrain
Application
Lime storage, extraction and dosing for remineralisation and pH control
Period
2008 to 2025

The challenge

Desalinated water is aggressive: stripped of calcium and alkalinity, it corrodes distribution networks unless it is remineralised. Plants therefore consume hydrated lime continuously, often delivered in bulk or in big bags, in a hot and sometimes humid coastal climate. Lime that bridges in a silo, cakes in a hopper or doses irregularly quickly becomes a water-quality issue.

Selected references in the region

The table below summarises references listed by Sodimate for desalination and water projects in the GCC. Each line describes the equipment supplied for the lime line.

YearProjectCountryCustomerEquipment supplied
2008FujairahUAEOTV4 silos of 200 m³, 4 feeding systems DDS 400, 4 screw feeders DDMR 100, 4 injectors ID 120, 2 preparation tanks of 5 m³
2009Al DurBahrainDegremont2 silos of 220 m³, 2 feeding systems DDS 400, 2 screw feeders DDMR 120, 2 injectors ID 120, 2 preparation tanks, 1 hopper
2018King Abdullah Economic CitySaudi ArabiaMetito Saudi1 silo of 55 m³, feeding system ZCD 400, screw feeder DDMR 80, screw conveyor DMR 100, injector ID 100
2019Duba SWRO plantSaudi ArabiaMetito2 silos of 60 m³, 2 feeding systems ZCD 400, 2 screw feeders DDMR 100, 2 screw conveyors DMR 120, 2 injectors ID 120
2020Floating desalination plantSaudi ArabiaMetito3 silos of 65 m³, 2 feeding systems ZDM 400, 2 screw feeders DDMR 120, 2 screw conveyors DMR 120, injectors ID 120 and ID 150
2024Jubail (sodium bisulphite)Saudi ArabiaS.S.E.M.2 big bag discharge hoppers of 1.75 m³, 2 ZFP 800, 2 conveyors, 2 injectors ID 150, 2 preparation tanks, 2 electrical panels
2025Amaala, lime milk preparationSaudi ArabiaSuez InternationalBig bag station, dosing system ZFP 400, screw conveyors DDMR 40 and DMR 70, injector ID 80
2025ADPG bargesUAETecton Engineering & Construction1 m³ big bag stand, 4 feeding systems, 1 hydro-ejector
n/aIdam Al ZawrahUAECadaguaLime slurry plant from big bags: 4 big bag unloaders with dosing systems, skid-mounted tanks, pumping and electrical panel

Other Sodimate references in Saudi Arabia include projects at Shuaibah III, Jazan, Yanbu, Tanajib and King Abdullah Economic City, covering reagents such as hydrated lime, quicklime, sodium metabisulphite, activated carbon and microsand.

Typical Sodimate lime line: silo, mechanical discharge, dosing and slurry preparation (3D view)
Typical Sodimate lime line: silo, mechanical discharge, dosing and slurry preparation (3D view)

What these installations have in common

  • Storage sized to consumption: silos from 55 to 220 m³ for continuous plants, big bag stations for smaller or temporary needs.
  • Mechanical extraction: feeding systems (DDS, ZCD, ZDM series) that keep lime flowing without bridging.
  • Controlled dosing and injection: screw feeders, conveyors and ID injectors delivering lime to preparation tanks at a stable rate.
  • Redundancy: duplicated lines on most large plants, so that one line can be maintained while the other runs.

Relevance for new projects

With new SWRO capacity under development across the region, lime systems remain a critical package. Soditech supports EPC contractors and operators in defining lime storage and dosing configurations, with the technical support of Sodimate.

Source: Sodimate reference lists (desalination and Saudi Arabia). Projects and equipment as listed by the manufacturer.

More about Sodimate →   Discuss your project →

Résumé en français : l'article complet est disponible en anglais (bouton EN).

Toute usine de dessalement doit reminéraliser l'eau produite avant distribution, et la chaux est l'un des principaux réactifs utilisés. Depuis près de vingt ans, les équipements Sodimate ont été fournis à des projets d'eau et de dessalement aux Émirats, en Arabie saoudite et à Bahreïn, via des EPC comme Metito, Suez, Degremont, OTV ou Cadagua.

Quelques références

Fujairah (OTV, 2008 : 4 silos de 200 m³), Al Dur à Bahreïn (Degremont, 2009 : 2 silos de 220 m³), King Abdullah Economic City (Metito, 2018), Duba SWRO (Metito, 2019), usine de dessalement flottante (2020), Jubail (S.S.E.M., 2024), Amaala (Suez International, 2025), barges ADPG (Tecton, 2025) et Idam Al Zawrah (Cadagua).

Points communs

Stockage dimensionné à la consommation (silos ou stations big-bag), extraction mécanique sans voûtage, dosage et injection à débit stable, et redondance des lignes sur les grandes usines. Soditech accompagne les EPC et exploitants de la région dans la définition de ces lignes chaux, avec l'appui technique de Sodimate.

Le tableau détaillé des références est disponible dans la version anglaise.

En savoir plus sur Sodimate →   Parler de votre projet →